Skip to main content
CONCRETE CALCULATOR

Our Solutions

E5® products are colloidal silica nanotechnology based. From moisture control to finish quality, E5® builds performance into the concrete itself—simpler specs, fewer steps, and measurable results across every slab.

E5-1

Proven by Data, Backed by Labs

Independent testing confirms PRAH level performance: ACI 212.3R10 (Ch. 15) with ASTM C494 Type S classification. DIN 10485 / BS EN 123908 (~72 psi, 3day) shows 50–90% permeability reduction, with penetration depth improved from 0.89 in (control) to 0.19 in using E5® Internal Cure + Liquid Fly Ash. Supported by university research on nano silica driven self healing durability. 

View Testing Data

Explore Our Solutions

Build performance into the slab—moisture, durability, finishability, workability, and sustainability. Choose a solution to see benefits, use cases, and specs.

Finishability – Smoother Closes, Fewer Passes

 

Stabilize the surface so tools glide—not grind. Achieve uniform sheen and a denser near-surface paste without adding water, even in challenging weather.

Workability – Consistent, Pumpable Mixes

 

Improve cohesiveness and flow for long-line pumping (200–300 ft) and complex placements. Reduce segregation/bleed and make concrete easier to place and consolidate.

Durability – Engineered to Last

 

Resist abrasion, salts, and freeze–thaw with a harder, less permeable wear layer. Reduce maintenance and extend asset life across pavements, decks, and high-traffic floors.

Shrinkage & Curling – Flatter, More Stable Slabs

 

Manage moisture from within to lower drying shrinkage and curling, reduce random cracking, and deliver predictable FF/FL for finishes and floor coverings.

Moisture Mitigation – Adhesive-Ready Substrates

 

Proactively manage slab moisture and surface pH to protect adhesives and coverings. Options for new pours and existing slabs—including warrantied pathways.

Waterproofing – Protection From Within

 

Densify the matrix and cut permeability by up to 90% to resist hydrostatic pressure without external membranes. Ideal for below-grade, tunnels, and water-contact structures.

Sustainability – Lower Carbon, Higher Performance

 

Cut cement, eliminate topical/wet cures, and reduce hazardous waste while maintaining strength, durability, and schedule. Documentable CO₂ savings, spec-ready.

Frequently Asked Questions

Clear answers for spec-driven teams. We’ve pulled together the most common questions on dosing, performance, and compatibility so you can finalize specs with confidence. 

How is E5® different from topical sealers and curing compounds?

E5® works inside the concrete—densifying and curing the matrix—so it doesn’t rely on a surface film. In many specs it replaces wet curing and multiple topicals, delivering lower permeability and higher surface hardness with less maintenance.

Can E5® replace membranes for below grade work?

Often, yes. E5® systems achieve PRAH-level permeability reduction (third-party verified), but suitability depends on hydrostatic head, joints/penetrations, and the project spec—some codes still require membranes in specific areas.

Will E5® change my finish process?

You’ll get a longer, more controllable finishing window with less drag and a denser paste—so fewer water-adds and more uniform FF/FL. Many teams pair Internal Cure with Miracle Aid or Catalyst for even smoother troweling without extra steps.

2025 Copyright. All rights reserved. Site built with Sprocket Rocket & HubSpot. Privacy policy Terms